HDPE liquid Medicine Bottle

Home / Products / Plastic Liquid Medicine Bottle / HDPE liquid Medicine Bottle

HDPE liquid Medicine Bottle

"The Cylinder Round Plastic Bottles with pull push cap is suited for squeezable products.Such as used for Pharmaceutical liquid packaging, personal care liquid packaging, labware, and chemical packaging, etc. Our bottles come in array of plastic materials. (LDPE) is a squeezable soft plastic often times paired with dispensing closures such as press tops and spouted caps. (HDPE) is much harder and is favored to pair with a fine mist sprayer or Flip top caps! Other compatible 24/410 Standard Thread Caps also can be used on the plastic liquid bottles. Extrusion blowing moulded plastic round LDPE Bottles with 24mm bottle neck, manufactured in factory Cleanroom. Available in Natrual and White color or with other colours possible for viable production quantities."

  • Parameter Table

    Neck Finish Φ
    Bottle Φ
    Bottle Material
    Cap Material

Contact us

If you need it, please contact us!

Zhejiang Zhenhua Plastic Co., Ltd.

Zhejiang Zhenhua Plastic Co., Ltd. (Referred as the "company") was established in 1992, Covering an area near70000 square meters. is a comprehensive high-tech private enterprise integrating research and development, production and sales, is a high-tech private enterprise in zhejiang province. Zhenhua plastic introduced advanced equipment, high-quality molds, equipped with perfect testing equipment, has more than 9000 square meters of 100,000 class purification workshop. It is the most professional medical packaging factory in Zhejiang Province. Precision ASB one-step injection and blow-pull molding equipment, fully automatic injection molding machine, At present, all the equipments in the company are controlled fully by micro-computer. The whole production process is designed according to GMP standard and reaches 100,000 standard purification workshop.

Company Certificate

Products have a variety of certification,

News Center

Industry knowledge

How can I accurately measure and administer liquid medication using a plastic syrup medicine bottle with graduated markings?

1. Gather the necessary supplies: Apart from the plastic syrup medicine bottle, you will need the medication prescribed, a clean and dry medicine dropper or an oral syringe, and a flat surface to work on.

2. Read the instructions: Carefully read the prescription label or the package insert of the medication. Note any specific instructions regarding dosages, frequency, or dilution requirements.

3. Clean the bottle: Prior to use, ensure the bottle is clean. Wash it with warm water and mild soap, rinse thoroughly, and allow it to air dry or pat it dry with a clean cloth or paper towel.

4. Familiarize yourself with the graduated markings: Examine the bottle to locate the graduated markings. These markings are typically engraved or printed on the side of the bottle and indicate the volume of liquid in milliliters (ml) or fluid ounces (fl oz).

5. Shake the medication: If the medication needs to be shaken before use, hold the bottle securely with the cap on, and gently invert it a few times to ensure proper mixing.

6. Prepare the dropper or oral syringe: If your bottle does not come with an integrated dropper, attach the appropriate dropper or oral syringe. Ensure that the dropper or syringe is clean and dry.

7. Draw the medication: With the bottle securely held upright, insert the dropper or syringe into the bottle's opening. Gradually draw the liquid into the dropper or syringe by gently squeezing the bulb or pulling back the plunger. Take note of the volume you draw based on the graduated markings.

8. Check for air bubbles: Once the desired volume is drawn, carefully inspect the dropper or syringe for any air bubbles. If present, gently tap the side of the dropper or syringe to dislodge them, and then push the air out.

9. Administer the medication: Following the specific dosage instructions, either directly place the measured medication into the patient's mouth or mix it with a suitable liquid or food if permitted. Make sure to administer the medication gently to prevent choking or spillage.

10. Clean and store the bottle and measuring device: After use, thoroughly clean the plastic syrup medicine bottle, dropper, or oral syringe with warm water and mild soap. Rinse them well and allow them to air dry. Store them in a clean, dry place until the next use.

How does a plastic syrup medicine bottle with graduated markings work?

The bottle itself is typically made of high-quality, food-grade plastic that is safe for storing medicinal liquids. It is designed with a secure screw-on cap to prevent leakage and ensure the integrity of the medication.

The most notable feature of the plastic syrup medicine bottle is its graduated markings. These markings are typically printed on the side of the bottle and indicate different volume levels, allowing for precise measurement of the liquid medication.

To use the bottle, you first need to ensure that it is clean and sanitized. This is important to prevent any contamination of the medication. Once the bottle is clean, you can fill it with the prescribed syrup or liquid medicine up to the desired volume indicated by the graduated markings.

The graduated markings on the bottle are usually displayed in milliliters (ml) or fluid ounces (fl oz). They may be numbered sequentially or marked at regular intervals, such as every 5 ml or 0.2 fl oz, depending on the specific design of the bottle. This allows for flexible dosing options, depending on the prescribed quantity.

When dispensing the medication, you can simply invert the bottle and pour the syrup into a dosing cup or directly into a spoon. The graduated markings help you accurately measure the required dosage, ensuring that you administer the right amount of medication.

It's important to note that when using a plastic syrup medicine bottle with graduated markings, you should hold the bottle upright and at eye level to accurately read the markings. This helps prevent any potential errors in measurement.

After each use, it is essential to clean the bottle thoroughly to remove any residue or remnants of the medication. You can wash it with mild soap and warm water, ensuring that all traces of the medication are removed before storing it for future use.

Contact Us

*We respect your confidentiality and all information are protected.


Contact Us